Oppai Factory LCG Chassis for Injora IR40 TRX4m Body

The new Injora Body is really awesome isn’t it? After getting mine and looking at how the LCGs worked with it, the clearance issues with Hightrail links, and how low it mounted the trans plate below the body line; I decided to make my own bespoke chassis for it.

This chassis sucks the frame rails into the body by nearly 16mm and has the skids and battery tray integrated into each 1pc frame rail. Specifically designed to use my High Clearance Plate it has a completely smooth underside so you won’t get hung up in those typical 4m places. The battery is held down by the clipped body itself so no more straps or fiddling to swap batteries. Included are LH and RH Mounting trays for ESCs and or Receivers to tuck into the cab rather than having that mess of wires and the back of the bed. This also improved your weight bias.

Specifically designed to utilize the 165mm wheelbase without steering or rubbing issues even when set at max low. Fully capable of being use with the stand up or lay down servo mounts, and tons of mounting points for the shocks to dial in your FJ.

Lastly there are hooks build into the upper frame cradle that allow the use of a rubber band limiting strap to prevent unloading of the suspension on steep climbs.
Kit comes complete with:

LCG Chassis
High Clearance Plate
SS Hardware
Black Rubber Band Limiting strap
Instructions/ Diagram

Note* The supplied High Clearance plate is required for this frame and is made of 3D Printed plastic same as the frame. If you would like to utilize a metal plate be it Aluminum or Brass please see the Tools section of the store where you can purchase a High Clearance Drill Jig and make your metal plate in to a High Clearance one.

LAYDOWN Servo recommended! You can use it with a typical stand up servo, but you won't be benefiting from the chassis nearly as much as it is meant to be a low CG chassis and needs the low profile and low CG Laydown mount to get the best performance.

Disclaimer:

This is a 3D printed part. It is made from PLA+ Plastic. It has an inherent "layered" look and may require some slight modification if your vehicle is fitted with other aftermarket parts.

Please view my packaging and inspect the package BEFORE handing it to young children. While my logo is suggestive, it is not unsightly, but may require the approval of a responsible parent before giving it (and the small contents inside) to a child.